Samsung Galaxy A10e A102 Repair Firmware

For those of you who own a Samsung Galaxy A10e A102, Sometimes one of the installations may go wrong or data may be corrupted. This means that your device will not boot anymore, will crash a lot, and will not be usable at all, but you can use Samsung Galaxy A10e A102 Repair Firmware to Fix your Samsung Mobile.

Be careful when choosing the firmware to flash. For example, you only need to use firmware designed for the exact model of your device. Flashing firmware may cause you to lose the warranty, temporarily or permanently. You are responsible for the treatment inflicted on your Android device.

Samsung Galaxy A10e A102 Repair Firmware:

Before you begin, it is important to have all the tools at hand. you will need:

•          install Samsung USB drivers, tutorial: Android USB drivers for all Smartphones and Tablets
  
  
  ·         Download and extract the latest version of Odin: Download Odin Tool for Samsung Devices – All Versions
• Download Pit files for Samsung devices: Pit files 
• Download Samsung Galaxy A10e A102U Repair Firmware Android 9.0 Pie:
  • A102USQU1ASFI_A102UOYN1ASFI_TMB_9.0_FULL.zip

---

1. Restart Your Samsung Galaxy A10e A102 in DOWNLOAD MODE:

• Turn off your Samsung Mobile
•  Press & hold the Power button + Volume Up button at the same time.
• Release all buttons when you see Recovery Mode.
• Choose Reboot to Bootloader then press on the Power button to confirm.
• Connect your Samsung Galaxy A10e A102 to your PC via the USB cable

2. Run the “Odin” file as an administrator.

3. Check that the USB port number is displayed in the “ID: COM” box and the message “Added !!” in the “Message” box. the port ID: COM on Odin must change to Blue or Yellow, depending on the version of Odin used.
4. Choose files in the Odin:

• “PIT” or “CSB “ is a pit file: put it in the “PIT ” field 
• Bootloader or BL is the bootloader file: put it in the “Bootloader” or “BL”
• CODE, PDA or AP: put it in the “PDA” or “AP”
• MODEM or PHONE or CP is the phone network file: put it in the “PHONE ”or “CP” field
• CSC is the language file: put it in the field “CSC” field.

5. Click “Start” to begin the installation.

6. The Update process might take some time to complete.

7. Once the message “PASS!” Displayed, unplug your mobile from your PC.

8. Well done! You have just Fix your Device via Samsung Galaxy A10e A102 Repair Firmware.