Samsung Galaxy S10 5G Combination ROM

Samsung Galaxy S10 5G Combination ROM file is a raw ROM for engineers and developers to run the device & can fully read and test the equipment of the device. It is also similar to the Service menu and shows the complete device information.

Samsung Galaxy S10 5G Combination ROM used for reasons of advanced maintenance:

How to check Combination file compatibility with your device:

Example: COMBINATION_FA70_G950USQU1AQI3

FA80=Android Oreo 8…
FA70=Android Nougat 7…..
FA60=Android Marshmallow 6…
FA51=Android Lollipop 5.1
FA50=Android Lollipop 5.0
FA44=Android KitKat 4.4
FA43=Android Jelly Bean 4.3
FAJP=Android Jelly Bean
FTMA=Tizen OS

---

O=2015 / P=2016
Q=2017 / R=2018

---

A=January / B=February / C=March / D=April / E=May / F=June
G=July / H=August / I=September / J=October / K=November/ L=December

---

1=Revision 1 / 2=Revision 2 /  3=Revision 3  / 4=Revision 4 / 5=Revision 5 / 6=Revision 6 / 7=Revision 7 / 8=Revision 8 / 9=Revision 9 / A=Revision 10 / B=Revision 11 / C=Revision 12 / D=Revision 13 / E=Revision 14 F=Revision 15

---

• install Samsung USB drivers, tutorial: Android USB drivers for all Smartphones and Tablets
• Download and extract the latest version of Odin: Download Odin Tool for Samsung Devices – All Versions
• Download and extract the Samsung Galaxy S10 5G Combination ROM:

G977UVRU1ASE2	Combination File

Flash Samsung Galaxy S10 5G Combination ROM

1- Restart Your Device in DOWNLOAD MODE

• Turn ON your Samsung Galaxy S10 5G
•  Press & hold the Power button & Volume Up button at the same time for 8 seconds.
• Leave Both Buttons then wait 10 Seconds to enter to Upload Mode.
• Now Press & hold the Power button + Bixby Button + Volume Down button for 4 seconds.
• When the device switch OFF Leave Volume Down button & hold the Power + Bixby + Volume Up.
• When the Samsung Logo appears leave the Power button.
• Choose Reboot to Bootloader then press on the Power button to confirm.
• Connect your Samsung Galaxy S10 5G to your PC via the USB cable

2- Run the “Odin” file as an administrator.

3-Check that the USB port number is displayed
4-Click on “AP” and import the Samsung Galaxy S10 5G Combination ROM file.

5- Click “Start” to begin the installation.

6- Once the message “PASS!” Displayed, unplug your Samsung Galaxy S10 5G from your PC.