Samsung Galaxy S10 5G Repair Firmware

For those of you who own a Samsung Galaxy S10 5G, Sometimes one of the installations may go wrong or data may be corrupted. This means that your device will not boot anymore, will crash a lot, and will not be usable at all, but you can use Samsung Galaxy S10 5G Repair Firmware to Fix your Samsung Mobile.

Be careful when choosing the firmware to flash. For example, you only need to use firmware designed for the exact model of your Samsung Galaxy S10 5G. Flashing firmware may cause you to lose the warranty, temporarily or permanently. You are responsible for the treatment inflicted on your Android device.

Samsung Galaxy S10 5G Repair Firmware:

Before you begin, it is important to have all the tools at hand. you will need:

•          install Samsung USB drivers, tutorial: Android USB drivers for all Smartphones and Tablets
  
  
  ·         Download and extract the latest version of Odin: Download Odin Tool for Samsung Devices – All Versions
• Download Pit files for Samsung devices: Pit files 
• Download Samsung Galaxy S10 5G SM-G977U Repair Firmware Android 9.0 Pie:
  • G977UVRU1ASEF_G977UVZW1ASEF_VZW_9.0_FULL.zip
• Download Samsung Galaxy S10 5G SM-G977N Repair Firmware Android 9.0 Pie:
  • G977NKSU1ASE5_G977NOKR1ASE5_KTC_9.0_FULL.zip
  • G977NKSU1ASE5_G977NOKR1ASE5_KOO_9.0_FULL.zip
  • G977NKSU1ASE5_G977NOKR1ASE5_LUC_9.0_FULL.zip
  • G977NKSU1ASE5_G977NOKR1ASE5_SKC_9.0_FULL.zip

---

1. Restart Your Samsung Mobile in DOWNLOAD MODE:

• Turn ON your Samsung Galaxy S10 5G
•  Press & hold the Power button & Volume Up button at the same time for 8 seconds.
• Leave Both Buttons then wait 10 Seconds to enter to Upload Mode.
• Now Press & hold the Power button + Bixby Button + Volume Down button for 4 seconds.
• When the device switch OFF Leave Volume Down button & hold the Power + Bixby + Volume Up.
• When the Samsung Logo appears leave the Power button.
• Choose Reboot to Bootloader then press on the Power button to confirm.
• Connect your Samsung Galaxy S10 5G to your PC via the USB cable

2. Run the “Odin” file as an administrator.

3. Check that the USB port number is displayed in the “ID: COM” box and the message “Added !!” in the “Message” box. the port ID: COM on Odin must change to Blue or Yellow, depending on the version of Odin used.
4. Choose files in the Odin:

• “PIT” or “CSB “ is a pit file: put it in the “PIT ” field 
• Bootloader or BL is the bootloader file: put it in the “Bootloader” or “BL”
• CODE, PDA or AP: put it in the “PDA” or “AP”
• MODEM or PHONE or CP is the phone network file: put it in the “PHONE ”or “CP” field
• CSC is the language file: put it in the field “CSC” field.

5. Click “Start” to begin the installation.

6. The Update process might take some time to complete.

7. Once the message “PASS!” Displayed, unplug your mobile from your PC.

8. Well done! You have just Fix your Device via Samsung Galaxy S10 5G Repair Firmware.