Samsung Galaxy View2 2019 Repair Firmware

For those of you who own a Samsung Galaxy View2 2019, Sometimes one of the installations may go wrong or data may be corrupted. This means that your device will not boot anymore, will crash a lot, and will not be usable at all, but you can use Samsung Galaxy View2 2019 Repair Firmware to Fix your Samsung Mobile.

Be careful when choosing the firmware to flash. For example, you only need to use firmware designed for the exact model of your device. Flashing firmware may cause you to lose the warranty, temporarily or permanently. You are responsible for the treatment inflicted on your Android device.

Samsung Galaxy View2 2019 Repair Firmware:

Before you begin, it is important to have all the tools at hand. you will need:

•          install Samsung USB drivers, tutorial: Android USB drivers for all Smartphones and Tablets
  
  
  ·         Download and extract the latest version of Odin: Download Odin Tool for Samsung Devices – All Versions
• Download Pit files for Samsung devices: Pit files 
• Download Samsung Galaxy View2 2019 SM-T927A Repair Firmware Android 8.1.0 Oreo:
  • T927AUCU1ASC2_8.1.0_4File_USA (AT&T) ATT USERDATA.zip

---

1. Restart Your Samsung Galaxy View2 2019 in DOWNLOAD MODE:

• Turn off your Samsung Galaxy View2 2019
•  Press & hold the Power button + Volume Up button at the same time.
• Release all buttons when you see Recovery Mode.
• Choose Reboot to Bootloader then press on the Power button to confirm.
• Connect your Samsung Galaxy View2 2019 to your PC via the USB cable

2. Run the “Odin” file as an administrator.

3. Check that the USB port number is displayed in the “ID: COM” box and the message “Added !!” in the “Message” box. the port ID: COM on Odin must change to Blue or Yellow, depending on the version of Odin used.
4. Choose files in the Odin:

• PIT or CSB is a pit file: put it in the “PIT ” field 
• Bootloader or BL is the bootloader file: put it in the “Bootloader” or “BL”
• CODE, PDA or AP: put it in the “PDA” or “AP”
• MODEM or PHONE or CP is the phone network file: put it in the “PHONE ”or “CP” field
• CSC is the language file: put it in the field “CSC” field.

5. Click “Start” to begin the installation.

6. The Update process might take some time to complete.

7. Once the message “PASS!” Displayed, unplug your mobile from your PC.

8. Well done! You have just Fix your Device via Samsung Galaxy View2 2019 Repair Firmware.